EA Audio
Items in Basket:     Total Price:                
Music Players Amps and Dacs Earphones Accessories
Fiio i1

FiiO i1 Headphone Amplifier for iphone

The FiiO i1 is an Apple MFi certified, digital-to-analog converter (DAC) and headphone amplifier designed for the Lightning connector. The digital audio signal enters through the Lightning connector end that can be connected to the Apple iPhone/iPod/iPad (and other Apple products), while the analog audio signals are pushed out through the 3.5mm output. The i1 also automatically detects if you are using a standard headphone or one with in-line controls.

Just because Apple has ditched the headphone jack doesn't mean you have to ditch your favourite headphones. High-Performance DAC Chip Within the i1 is a high quality chip with both a DAC and a headphone amplifier. Not only does this chip support lossless audio formats, as well as achieve a high signal-to-noise ratio and low distortion, it also supports high-definition voice calls to give you crystal-clear conversations anytime, anywhere. (The i1 currently only supports up to lossless 48kHz audio due to the Lightning Audio Module (LAM) - this may change to up to 192kHz pending changes to the LAM.) High-quality Microphone that Clearly Captures Your Voice Built into the i1 is a high-sensitivity microphone that ensures your voice is clearly heard during calls and recordings - no more miserable conversations due to poor voice quality.

A Dedicated Companion App at Your Service FiiO has a team specifically dedicated to maintaining a dedicated iOS app for the i1, for fast and convenient firmware upgrades in the future. Supported Devices iPhone 7 Plus/iPhone 7/iPhone SE/ iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/iPhone 6/iPhone 5s/iPhone 5c/iPhone 5 iPad Pro (9.7-inch)/ iPad Pro (12.9-inch)/iPad Air 2/iPad Air/ iPad (4th generation)/iPad mini 4/iPad mini 3/iPad mini 2/ iPad mini iPod touch (6th generation)/ iPod touch (5th generation)/iPod nano (7th generation)

In Stock - Now £35.90




Apple MFi certified DAC and headphone amplifier designed for the Lightning connector

High quality microphone that clearly captures your voice

Compatible with a wide range of music apps and formats

Shares the same button layout as the stock Apple headset

Goes into low power mode when your Apple iOS device goes into standby

In the box.

FiiO i1 unit

User manual


Technical specifications.

  • Output Power 1: >30 mW(16Ω loaded/ THD+N<1%)
  • Output power 2:                               >15 mW(32 Ω loaded/THD+N<1%)
  • Frequency Response:                     20 Hz~20 kHz
  • SNR:   ≥105 dB (A-weighted/32Ω loaded)
  • Power Supply: USB on iPod/iPad/iPhone
  • CODEC Chip:: NAU88L25
  • Crosstalk:                                        ≥60 dB
  • Input interference:                           MFi standard lightning plug
  • Drive Ability:                                    16~32 Ω (recommended)
  • THD+N:                                           <0.003% (1 kHz)
  • Output Interference:                        3.5mm stereo jack
  • Supported USB Sample Rate:        Lossless 48kHz, may change to up to 192kz pending changes to the LAM module
  • Dimensions:                                    45.5mm in length, 9.5mm in diameter
  • Length:                                            80cm
  • Unit size: 97mm x 56mm x 13.1mm
  • Weight: 11.5g unit weight


Delivery Information About Us Contact Us Returns Terms & Conditions Approved FiiO dealer in the UK. Click here to verify

Office opening times - Monday - Thursday 9am to 4pm